MM74HCT374SJX Overview
20-SOIC (0.209, 5.30mm Width)is the way it is packaged. You can find it in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74HCT series. There should be no greater frequency than 30MHzon its output. There are 1 elements in it. There are 20 terminations,The 74HCT374 family contains this object. The power source is powered by 5V. This JK flip flop has a 10pFfarad input capacitance. A device of this type belongs to the family of HCT. Surface Mount mounts this electronic component. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 8bits. In order to achieve its superior flexibility, 8 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. A power supply of 5Vis required to operate it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. High efficiency requires the supply voltage to be maintained at 5V. It operates with 3 output lines. Despite external influences, it consumes 8μAof quiescent current.
MM74HCT374SJX Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT374SJX Applications
There are a lot of ON Semiconductor MM74HCT374SJX Flip Flops applications.
- Buffer registers
- Automotive
- Bounce elimination switch
- Data Synchronizers
- Clock pulse
- Supports Live Insertion
- Consumer
- 2 – Bit synchronous counter
- Load Control
- Frequency Dividers
