MC74LVX74DR2G Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. The output it is configured with uses Differential. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~3.6V. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74LVXseries of FPGAs. This D flip flop should not have a frequency greater than 85MHz. A total of 2elements are contained within it. T flip flop consumes 2μA quiescent energy. It is a member of the 74LVX74 family. This JK flip flop has a 4pFfarad input capacitance. There is an electronic part mounted in the way of Surface Mount. This board is designed with 14pins on it. In this device, the clock edge trigger type is Positive Edge. Flip flops designed with 2bits are used in this part. Its superior flexibility is attributed to its use of 2 circuits. In order to operate, the chip has 1 output lines. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It consumes 2μA current. High level output current is set to -4mA. The low level output current is set to 4mA. There should be a temperature below 85°Cduring operation. It should be higher than -40°Cwhen the system is operating. Despite its minimal supply voltage of 2V, it is capable of operating. 3.6Vis the maximum supply voltage supported by it. The frequency can be set to 145MHz. It is reported that there are 2 channels.
MC74LVX74DR2G Features
Tape & Reel (TR) package
74LVX series
14 pins
2 Bits
MC74LVX74DR2G Applications
There are a lot of ON Semiconductor MC74LVX74DR2G Flip Flops applications.
- Matched Rise and Fall
- Data transfer
- Memory
- Storage registers
- Buffered Clock
- ESD protection
- Single Down Count-Control Line
- Control circuits
- QML qualified product
- Registers
