MC100E137FNR2G Overview
The device is packaged in the 28-LCC (J-Lead)type. This configuration uses 28terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 28. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 28pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 100Eseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to 0°C~85°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 8bits for each element. Based on the Pbfree code, the result may be yes. Further related parts may be found under the base part number 100E137. For its packaging, TAPE AND REELis employed. To operate, the device requires a voltage of [0]. It is possible to provide a voltage up to 5.7V (Vsup). There are 2 input lines that allow binary data to be input in the form of an on/off signal.
MC100E137FNR2G Features
Embedded in the 28-LCC (J-Lead) package
8 bits per element
Operating supply voltage of 5V
MC100E137FNR2G Applications
There are a lot of ON Semiconductor
MC100E137FNR2G Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
