SN74AHCT374DWR Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). You can find it in the Cut Tape (CT)package. Currently, the output is configured to use Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74AHCT series. Its output frequency should not exceed 130MHz. The element count is 1 . There are 20 terminations,Members of the 74AHCT374family make up this object. A voltage of 5V is used as the power supply for this D latch. This T flip flop has a capacitance of 4pF farads at the input. The electronic device belongs to the AHCT/VHCT/VTfamily. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 8bits in this flip flop. Due to its superior flexibility, it uses 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. A power supply of 5Vis required to operate it. This flip flop has a total of 2ports. For high efficiency, the supply voltage should be kept at 5V. The number of input lines is 3. It consumes a total of 4μA quiescent current at any given time.
SN74AHCT374DWR Features
Cut Tape (CT) package
74AHCT series
20 pins
8 Bits
5V power supplies
SN74AHCT374DWR Applications
There are a lot of Texas Instruments SN74AHCT374DWR Flip Flops applications.
- Data storage
- Clock pulse
- Modulo – n – counter
- Patented noise
- ESCC
- Individual Asynchronous Resets
- Synchronous counter
- Test & Measurement
- Count Modes
- Dynamic threshold performance
