SN74HC574PW Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. A package named Tubeincludes it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. Currently, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74HCseries of FPGAs. A frequency of 36MHzshould not be exceeded by its output. There are 1 elements in it. As a result, it consumes 8μA quiescent current. 20terminations have occurred. You can search similar parts based on 74HC574. It is powered by a voltage of 5V . A JK flip flop with a 3pFfarad input capacitance is used here. Electronic devices of this type belong to the HC/UHfamily. There is an electronic part mounted in the way of Surface Mount. There are 20pins on it. Its clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. Flip flops designed with 8bits are used in this part. Vsup reaches 6V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be above 2V. The system runs on a power supply of 2/6V watts. The flip flop has 2ports embedded within it. The supply voltage should be maintained at 5V for high efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 7.8mA. Currently, there are 3 lines of input. There are 8 channels available.
SN74HC574PW Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
SN74HC574PW Applications
There are a lot of Texas Instruments SN74HC574PW Flip Flops applications.
- Automotive
- Individual Asynchronous Resets
- Shift Registers
- Counters
- Dynamic threshold performance
- Balanced 24 mA output drivers
- Buffer registers
- Computing
- Common Clocks
- Bus hold
