SN74AHCT16374DLR Overview
The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. As part of the package Cut Tape (CT), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74AHCTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 130MHz. D latch consists of 2 elements. T flip flop consumes 4μA quiescent energy. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74AHCT16374family includes it. It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 2.5pF farads. In terms of electronic devices, this device belongs to the AHCT/VHCT/VTfamily of devices. There is an electronic part mounted in the way of Surface Mount. There are 48pins on it. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. There are 16bits in this flip flop. This D flip flop is well suited for TR based on its reliable performance. An electrical current of 5V volts is applied to it. The D flip flop is embedded with 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
SN74AHCT16374DLR Features
Cut Tape (CT) package
74AHCT series
48 pins
16 Bits
5V power supplies
SN74AHCT16374DLR Applications
There are a lot of Texas Instruments SN74AHCT16374DLR Flip Flops applications.
- Memory
- Communications
- Guaranteed simultaneous switching noise level
- Load Control
- ESD protection
- Differential Individual
- 2 – Bit synchronous counter
- Automotive
- Supports Live Insertion
- Modulo – n – counter
