74LVX273MTCX Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Non-Inverted. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. -40°C~85°C TAis the operating temperature. The type of this D latch is D-Type. The FPGA belongs to the 74LVX series. There should be no greater frequency than 90MHzon its output. A total of 1elements are contained within it. There are 20 terminations,The 74LVX273 family contains this object. A voltage of 2.7V is used as the power supply for this D latch. Its input capacitance is 4pFfarads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. There is an electronic part that is mounted in the way of Surface Mount. There are 20pins on it. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. There are 8bits in this flip flop. The supply voltage (Vsup) should be kept above 2V for normal operation. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It is reported that there are 3 input lines. Despite external influences, it consumes 4μAof quiescent current. 8 channels are available.
74LVX273MTCX Features
Tape & Reel (TR) package
74LVX series
20 pins
8 Bits
74LVX273MTCX Applications
There are a lot of ON Semiconductor 74LVX273MTCX Flip Flops applications.
- Frequency Dividers
- CMOS Process
- Load Control
- ESCC
- Modulo – n – counter
- ATE
- Event Detectors
- Guaranteed simultaneous switching noise level
- Storage Registers
- Control circuits
