SN74AHC273DWR Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. As configured, the output uses Non-Inverted. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~5.5V. -40°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 110MHz Hz. There are 1 elements in it. Terminations are 20. The 74AHC273family includes it. A voltage of 3.3V is used as the power supply for this D latch. Its input capacitance is 2.5pF farads. A device of this type belongs to the family of AHC/VHC/H/U/V. A part of the electronic system is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latch. There are 8bits in this flip flop. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for TR. In order for the device to operate, it requires 2/5.5V power supplies. Featuring the maximum design flexibility, it has an output current of 8mA . As of now, there are 3input lines. In terms of quiescent current, it consumes 4μA .
SN74AHC273DWR Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies
SN74AHC273DWR Applications
There are a lot of Texas Instruments SN74AHC273DWR Flip Flops applications.
- Convert a momentary switch to a toggle switch
- ESD performance
- Data Synchronizers
- Set-reset capability
- Shift registers
- Dynamic threshold performance
- Latch-up performance
- Matched Rise and Fall
- Data storage
- ESD protection
