SN74ACT564DBRG4 Overview
The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Tri-State, Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. It belongs to the 74ACTseries of FPGAs. You should not exceed 90MHzin the output frequency of the device. A total of 1elements are present in it. There is a consumption of 4μAof quiescent energy. 20terminations have occurred. If you search by 74ACT564, you will find similar parts. The power source is powered by 5V. There is 4.5pF input capacitance for this T flip flop. A device of this type belongs to the family of ACT. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. The design is based on 8bits. 5.5Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. There are 5V power supplies attached to it. The flip flop has 2ports embedded within it. The output current of 24mA makes it feature maximum design flexibility. Currently, there are 8 input lines present. As an additional reference, you may refer to electronic flip flop BROADSIDE VERSION OF 534.
SN74ACT564DBRG4 Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
SN74ACT564DBRG4 Applications
There are a lot of Texas Instruments SN74ACT564DBRG4 Flip Flops applications.
- Load Control
- Pattern generators
- Safety Clamp
- Storage Registers
- Dynamic threshold performance
- Automotive
- ESD performance
- ATE
- Differential Individual
- Computing
