M74HC174RM13TR Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. D flip flop is included in the Tape & Reel (TR)package. Non-Invertedis the output configured for it. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. A temperature of -55°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74HCseries FPGA. Its output frequency should not exceed 66MHz Hz. In total, it contains 1 elements. It consumes 4μA of quiescent current without being affected by external factors. A total of 16 terminations have been made. This D latch belongs to the family of M74HC174. A voltage of 4.5V is used as the power supply for this D latch. A 5pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with 6bits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. Currently, there are 6 lines of input.
M74HC174RM13TR Features
Tape & Reel (TR) package
74HC series
16 pins
6 Bits
M74HC174RM13TR Applications
There are a lot of STMicroelectronics M74HC174RM13TR Flip Flops applications.
- Buffered Clock
- CMOS Process
- Single Down Count-Control Line
- Data storage
- High Performance Logic for test systems
- Count Modes
- Supports Live Insertion
- Balanced 24 mA output drivers
- Latch-up performance
- ESCC
