SN74AC574DWRE4 Overview
SOICis the packaging method. The Tape and Reelpackage contains it. A total of 20terminations have been recorded. A voltage of 3.3V provides power to the D latch. It belongs to the family of electronic devices known as AC. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a Bus Driver/Transceiverbase part number assigned to the RS flip flops. It is designed with 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. This flip flop has a total of 2ports. In order for the chip to function, it has 1output lines. A total of 3input lines have been provided. A -24mAvalue is set for the high level output current. 24mA is the low level output current. A temperature below 85°Cis recommended for operation. It is recommended that the operating temperature be greater than -40°C. Despite its minimal supply voltage of 2V, it is capable of operating. 6Vis the maximum supply voltage it supports. We are able to achieve a frequency of 153MHz. The logic IC it uses is BUS DRIVER. As a result, it is equipped with 1 functions . This device is equipped with a pin count of 20. In addition to its maximum design flexibility, the output current of the flip flop is 24mA.
SN74AC574DWRE4 Features
Tape and Reel package
20 pins
8 Bits
1 Functions
20 pin count
SN74AC574DWRE4 Applications
There are a lot of Texas Instruments
SN74AC574DWRE4 Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
