SN74AC574DW Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACseries contain this type of chip. It should not exceed 153MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. It has been determined that there have been 20 terminations. The 74AC574 family contains this object. A voltage of 3.3V is used as the power supply for this D latch. A 4.5pFfarad input capacitance is provided by this T flip flop. It is a member of the ACfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 20 pins. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. In this case, the maximum supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. This D flip flop is equipped with 0 ports. It offers maximum design flexibility with its output current of 24mA. 3input lines are available for you to choose from. A total of 8 channels are available.
SN74AC574DW Features
Tube package
74AC series
20 pins
8 Bits
SN74AC574DW Applications
There are a lot of Texas Instruments SN74AC574DW Flip Flops applications.
- Storage Registers
- Registers
- Cold spare funcion
- Parallel data storage
- ESD protection
- Single Down Count-Control Line
- Frequency division
- Memory
- Bus hold
- Individual Asynchronous Resets
