PGA117AIPWRG4 Overview
It is packaged in an TSSOP-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 20 terminations this year. A total of 20 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Other Analog ICs op amp ic can be identified by the fact that this is a type of Other Analog ICs device. In total, the buffer amplifier consists of 20 pins. Op amp ic rates 325μV for input offset voltage. A supply current of 330μA can be used to operate this linear amplifier. This op amp ic has 1 circuits. There are a total of 10 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 125°C. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 2.2V is recommended. The quiescent current is 1.1mA. It is important that the linear amplifier resistance stays within the range of 10GOhm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.
PGA117AIPWRG4 Features
20 Pins
supply voltage of 5V
Resistance of 10GOhm
PGA117AIPWRG4 Applications
There are a lot of Texas Instruments
PGA117AIPWRG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
