XTR105PG4 Overview
There is a PDIP case in which the instrumentation amplifier is packaged. Buffer amps of this type are called INSTRUMENTATION AMPLIFIER-types. The number of terminations is approaching the 14 mark. The total number of pins on linear amplifier is 14. The linear amplifier should be run at 24V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 100μV. It is possible to operate this buffer amplifier from a supply current of 20mA . Op amp ic has 1 channels. A benefit of this op amp ic is that it outputs Voltage signals, which is one of the many advantages it has to offer. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 85°C, Instrumentation amplifier should not be used. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 7.5V.
XTR105PG4 Features
14 Pins
supply voltage of 24V
Output Type: Voltage
XTR105PG4 Applications
There are a lot of Texas Instruments
XTR105PG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
