OPA2356AIDGKT Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a Voltage Feedback type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 9mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 8.3mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 92dB. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Op amp has total of 2 elements. The operating supply voltage of the buffer op amp is rated at 5V. For packing the buffer amplifier, the TR-axis is adopted.
OPA2356AIDGKT Features
8 Pins
supply voltage of 5V
92dB voltage gain
Output Type: Rail-to-Rail
OPA2356AIDGKT Applications
There are a lot of Texas Instruments OPA2356AIDGKT Instrumentational OP Amps applications.
- Proportional operation circuits
- Proportional counter tubes
- Professional videography
- Television
- Voltage regulation circuit
- Video amplifiers
- Navigation
- E-book readers
- Video conversion and routing
- Fission chambers
