OPA2244EA/250 Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 7.5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. There is an input offset voltage of 1.5mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Maintain 106dB as the voltage gain. The op amp ic has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For packing the buffer amplifier, the TR-axis is adopted. As a recommendation, this electronic component should be used with a power supply that can deliver 40μA. This buffer amplifier is assigned within the MicroAmplifier? series by its manufacturer.
OPA2244EA/250 Features
8 Pins
supply voltage of 7.5V
106dB voltage gain
OPA2244EA/250 Applications
There are a lot of Texas Instruments OPA2244EA/250 Instrumentational OP Amps applications.
- Industrial applications including automation
- Medical imaging
- Signal filtering
- Communication
- Proportional counter tubes
- High/low-pass filter circuit
- Measurements of Wheatstone bridge
- Test equipment
- Power control
- Signal operation
