NE556DG4 Overview
There is a SOIC enclosure with the programmable timer. Frequency is set to 500kHz on the programmable timer.To mount this digital timer with Surface Mount. The operating supply voltage is rated at 20mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 129.387224mg in weight. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 16V. The timer clock runs quiescent current at 30mA. The number of Timers/Counters on the device is 2.
NE556DG4 Features
Operate frequency at 500kHz
Max Operating temperature at 0°C
Quiescent Current at 30mA
2 Timers/Counters
NE556DG4 Applications
There are a lot of Texas Instruments
NE556DG4 Programmable Timers & Oscillators applications.
- Intruder Detection
- Tamper Detection
- Home Automation Sensors
- Thermostats
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
