SNJ54AHC123AFK Overview
It is used to pack in Rail/Tube case. The minimum operating temperature of the chip must not be lower than -55°C. It's best to use the timer clock when the temperature is below 125°C. The timer clock contains 20 pins. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS. The sum of the IC chip pins is 20 . The number of the chip's terminations sums up to 20. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 5.5V. The timer clock runs quiescent current at 4μA.
SNJ54AHC123AFK Features
Package / Case: Rail/Tube
Max Operating temperature at -55°C
Additional Feature: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS
Quiescent Current at 4μA
SNJ54AHC123AFK Applications
There are a lot of Texas Instruments
SNJ54AHC123AFK Programmable Timers & Oscillators applications.
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
- Car Door Handle circuit
- Smart Key
- Remote current sensor
- Intruder Detection
- Power-On Reset Timer
- Long Time One Shot
- “Heartbeat” Timers
