CD4536BNSRG4 Overview
SOP comes in a package with the timer clock. [0] is the frequency of the programmable timer.It is used to pack in Tape and Reel case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 3mA voltage. The minimum operating temperature of the chip must not be lower than -55°C. It's best to use the timer clock when the temperature is below 125°C. The timer clock contains 16 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 16 . The number of the chip's terminations sums up to 16. The timer clock has 200.686274mg in weight. The minimum supply voltage of the chip must not be lower than 3V. The supply voltage of this chip should not exceed 18V. The timer clock runs quiescent current at 100μA. The number of Timers/Counters on the device is 1.
CD4536BNSRG4 Features
Operate frequency at 5MHz
Package / Case: Tape and Reel
Max Operating temperature at -55°C
Quiescent Current at 100μA
1 Timers/Counters
CD4536BNSRG4 Applications
There are a lot of Texas Instruments
CD4536BNSRG4 Programmable Timers & Oscillators applications.
- Tamper Detection
- Home Automation Sensors
- Thermostats
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
- Car Door Handle circuit
