NA556NE4 Overview
There is a PDIP that comes with the timer clock, which is enclosed in the packaging. To mount this digital timer with Through Hole. The operating supply voltage is rated at 20mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 105°C. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. The timer clock has 927.99329mg in weight. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 16V. The timer clock runs quiescent current at 30mA. The number of Timers/Counters on the device is 2.
NA556NE4 Features
Max Operating temperature at -40°C
Quiescent Current at 30mA
2 Timers/Counters
NA556NE4 Applications
There are a lot of Texas Instruments
NA556NE4 Programmable Timers & Oscillators applications.
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
- Car Door Handle circuit
- Smart Key
- Remote current sensor
- Intruder Detection
