NA555DRG4 Overview
The timer clock is enclosed in a packaging that is attached to the SOIC. There is 100kHz frequency set on the programmable timer.It is used to pack in Tape & Reel (TR) case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 105°C. The timer clock contains 8 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 8 . The number of the chip's terminations sums up to 8. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 72.603129mg in weight. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 16V. The timer clock runs quiescent current at 15mA. The number of Timers/Counters on the device is 1.
NA555DRG4 Features
Operate frequency at 100kHz
Package / Case: Tape & Reel (TR)
Max Operating temperature at -40°C
Quiescent Current at 15mA
1 Timers/Counters
NA555DRG4 Applications
There are a lot of Texas Instruments NA555DRG4 Programmable Timers & Oscillators applications.
- Tamper Detection
- Long Time One Shot
- Motor control
- Building Automation
- Periodic “Wake-Up” Call
- Car Door Handle circuit
- High Vibration, High Acceleration Environments
- “Heartbeat” Timers
- Power-Gating Applications
- Battery Powered Systems
