MAX4595DBVR Overview
Shipping overseas is convenient with the electronic component packed in SC-74A, SOT-753. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 5 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. An injection of 5 pins is performed into the body of the electrical component. Multiplexers built on a SPST - NC switching circuit are built. If you are looking for variants of the digital switch, trying search with MAX4595. In this multiplexer, the internal resistance is 10Ohm. For functions related to 5 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. This multiplexer would work with 1μA current. A voltage of 2.4V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. The transfer of data can be performed over 300MHz bandwidths.
MAX4595DBVR Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
Bandwidth: 300MHz
MAX4595DBVR Applications
There are a lot of Texas Instruments MAX4595DBVR Analog Switches & Multiplexers ICs applications.
- Communication systems
- FTTH
- Automotive applications
- Signal routing between systems
- PDAs
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Channel Banks
- Video signal routing
- Switching Systems
- 65 V DACs
