ADG1402BRMZ Overview
Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~125°C TA. 8 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. An electrical component like this is included in the 8 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Search with ADG1402 if you are looking for analog multiplexer variants. A 1.3Ohm internal resistance characterizes this multiplexer. The functions of 8 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 16.5V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. 5V should be the lowest voltage fed to the electronic component. If put voltage greater than 95μA on the device, damage may be caused to the analogue multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. 12V operating voltages can be used with this electrical part. Operating 1 inputs is required. The data can be transferred over a wide range of bandwidths, called 120MHz bandwidths.
ADG1402BRMZ Features
1 Channels
Switch Circuit: SPST - NC
Bandwidth: 120MHz
ADG1402BRMZ Applications
There are a lot of Analog Devices Inc. ADG1402BRMZ Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- FTTH
- Public switching systems
- Low-Voltage
- Industrial and process control systems
- Battery-powered systems
- Cross Connects
- Digital cross connects (DSX-1)
- Sample hold systems
- Fiber to the Home
