LP873200RHDTQ1 Description
There is a 28-VFQFN Exposed Pad package for easy voltage regulators' transportation of the harley voltage regulator. Ready for shipping in Cut Tape (CT) package. There are a total of 4 outputs that are supported by the voltage regulator. In order to prevent malfunctions, it is recommended that the operating temperature be set to -40°C~125°C TA. You can get more pin-to-pin solutions by searching LP873200. The switching regulator has 28 terminals that can be found on the side of the switching regulator. The voltage regulator 12v is capable of completing many demanding tasks when supplied with 3.7V voltage. There is a minimum requirement of 2.8V for the DC-DC Switching Regulator to begin operating. It is not recommended that you feed the voltage regulator DC to DC with voltages higher than 5.5V if you want it to work properly. Quality output is achieved by combining 4 channels of the voltage regulator. There is a voltage regulator 12v from Automotive, AEC-Q100 used in this voltage regulator 12v.
LP873200RHDTQ1 Features
4 outputs
Operating Temperature: -40°C~125°C TA
Supply voltage range: 3.7V
LP873200RHDTQ1 Applications
There are a lot of Texas Instruments LP873200RHDTQ1 Linear Regulator Controllers applications.
Low noise SMPS post regulator
Voltage References
Low-Voltage DSP Power Supplies
Motherboards
Consumer Electronics
Graphics Card
Personal Computers
Battery Operating Equipment
Switching Power Supplies
High Efficiency Linear Regulators
