TPS61107PW Overview
There is a 20-TSSOP (0.173, 4.40mm Width) package for easy voltage regulators' transportation of the harley voltage regulator.Embark on a journey with package Tube.The total number of outputs voltage regulator supports is 2.For optimal performance, the operating temperature should be set to -40°C~85°C.To find more pin-to-pin solutions for your specific needs, you can try searching for TPS61107.In the switching regulator, you can find 20 terminals that are connected to the board.There is one important thing to keep in mind when there is a pinout for a switching regulator and that is pin 20.Temperature should peak at 260 during relow soldering.Organizing the pins in this voltage regulator in a 20 pattern is the key to its functionality.In addition to its 3.3V output voltage, it can be used for a wide range of applications.To operate this regulator, you must supply voltage ≥ 800mV.There is a maximum voltage of 3.3V that can be used with this voltage regulator.Regulator controllers of this type have Fixed outputs.Current output from the DC DC Switching Regulator should be 270mA.There is a quiescent current of 65μA displayed by the regulator controller.Maximum current 800mA will be produced by it.
TPS61107PW Features
2 outputs
Operating Temperature: -40°C~85°C
Peak Reflow Temperature: 260
Quiescent Current: 65μA
TPS61107PW Applications
There are a lot of Texas Instruments TPS61107PW Linear Regulator Controllers applications.
- Low-dropout SMPS post regulator
- Microcontroller Power Supplies
- Post Regulation for Switching Supplies
- Voltage References
- Ultrahigh current ultralow dropout voltage regulator
- Motherboards
- Printer and other Peripheral Equipment
- LCD Monitor
- Low-Voltage DSP Power Supplies
- Ultra-Low-Dropout
