LP2902PWRE4 Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be 14 terminations in the next few months. In this case, there are 14 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 85μA . There should be no change in the voltage gain at 96.9dB. On this instrumentation amplifier, there are 4 circuits that are connected together. The operating supply voltage of the buffer op amp is rated at 16V. It is used TR to pack the op amps.
LP2902PWRE4 Features
14 Pins
supply voltage of 5V
96.9dB voltage gain
LP2902PWRE4 Applications
There are a lot of Texas Instruments LP2902PWRE4 Instrumentational OP Amps applications.
- Automation control systems
- Video amplifiers
- Band-pass filter
- Broadcasting
- Switching amplifier
- Active probe
- Division circuits
- Hand-held batteries
- Television broadcasting equipment
- single/dual op amp sum and difference circuits
