KA1458 Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 10mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 2.3mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 106.02dB. This op amp ic has 2 circuits. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. For optimal performance, this electrical part should be connected to a supply with a current of 2.3mA. It is important to keep in mind that the power supply voltage of this electric component is below 18V, which is suitable. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. The linear amplifier has 2 amplifiers.
KA1458 Features
106.02dB voltage gain
KA1458 Applications
There are a lot of ON Semiconductor
KA1458 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
