LMV7275MG Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 in order to facilitate transportation.Output type of this comparator is CMOS, Open-Drain, Rail-to-Rail .The part is shipped by Tape & Reel (TR) .The comparator has 5 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 1.8V .This is a typical comparator of type General Purpose .Currently, it consists of only 1 elements.The device includes 5 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.5 pins are available on the comparator.In order to find a solution that meets your specific needs, search LMV7275 for more pin-to-pin solutions.A quiescent current of 14μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 14μA .An excess of current supply over 14μA could result in malfunction of the comparator.You are allowed to input a maximum current of 10nA into the device.For normal operation, the operating supply voltage must be 5V .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LMV7275MG Features
CMOS, Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7275MG Applications
There are a lot of Texas Instruments
LMV7275MG linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
