CMP402GRUZ-REEL Overview
The product is packaged in 16-TSSOP (0.173, 4.40mm Width) to facilitate transportation.Output type CMOS, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.It's a typical General Purpose comparator.This element consists of 4 elements in total.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .16 pins are present on the comparator.You may wish to search CMP0402 for more solutions that address your specific needs.The comparator presents a quiescent current of 1mA volts.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 1.4mA .Electronic comparator is possible to input up to 3μA current into the device.A voltage gain of 80dB can be determined from the voltage formula for the part.Temperatures above 125°C are not recommended.A temperature lower than -40°C is unsuitable for the device.A comparator is designed to operate at a maximum supply voltage of 16V .For the output to be of high quality, 4 channels must cooperate together.
CMP402GRUZ-REEL Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1mA
Voltage Gain: 80dB
CMP402GRUZ-REEL Applications
There are a lot of Analog Devices Inc.
CMP402GRUZ-REEL linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
