LMV339MTX Overview
For convenience, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .There is a CMOS, Open-Collector, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 14 terminals.The electrical component here belongs to the Comparator family.With a 2.7V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .Electronic comparator consists of 4 elements in total.Electronic comparator has 14 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 14 .You can find more pin-to-pin solutions by searching LMV339 .As a result, this comparator displays a quiescent current of 300μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 300μA when using the device.A supply current exceeding 300μA may result in the comparator malfunctioning.There is sufficient power to run the device from 3/5V power supplies.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 93.98dB .Comparator electronics is necessary to have an operating supply voltage of 3V for normal operation.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LMV339MTX Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
Voltage Gain: 93.98dB
LMV339MTX Applications
There are a lot of Texas Instruments
LMV339MTX linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
