LMV321IDBVTE4 Overview
Packaged in a SOT-23 case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. The op amp is delivered to you in a Tape and Reel case. There is a growing number of terminations approaching the number of 5. The pins on this board total to 5 in total. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 7mV for this buffer op amp. As long as the supply current of the chip does not exceed 130μA, this op amp ic can operate. 100dB should remain the voltage gain. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 125°C should be used. The linear amplifier consists of 1 different elements in total. For packing the buffer amplifier, the TR-axis is adopted. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 5.5V. A high supply voltage of more than 2.7V is recommended for the instrumentation amplifier's supply voltage.
LMV321IDBVTE4 Features
5 Pins
supply voltage of 2.7V
100dB voltage gain
LMV321IDBVTE4 Applications
There are a lot of Texas Instruments
LMV321IDBVTE4 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
