LM139AW/883 Overview
An op amp of this type is a COMPARATOR-type. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Comparator op amp ic can be identified by the fact that this is a type of Comparator device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 2mV for input offset voltage. There should be no change in the voltage gain at 93.98dB. There are a total of 4 channels available on the op amps. One of its many advantages is that buffer op amp outputs OPEN-COLLECTOR signals. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. An buffer amplifier is packed in a TUBE-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 30V, which is suitable. Keeping the linear amplifier's supply voltage above 5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 15V volts.
LM139AW/883 Features
14 Pins
supply voltage of 5V
93.98dB voltage gain
Output Type: OPEN-COLLECTOR
LM139AW/883 Applications
There are a lot of Texas Instruments
LM139AW/883 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
