LMK62A2-150M00SIAT Overview
The timer clock is enclosed in a packaging that is attached to the 6-SMD Module. Set the programmable timer's frequency to 150MHz.It is used to pack in Tape & Reel (TR) case. It is recommended that you mount your device using type Surface Mount.Using the programmable timer, a voltage of 3.135V~3.465V can be supplied.The type of chips can be divided into Clock Oscillator. The operating temperature of this timer clock is -40°C~85°C TA. To keep the clock timer's supply current at 95mA. It is based on LMK62A2. The timer clock contains 6 pins. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; TR, 7 INCH. On operating frequency, it's available in the range of 150MHz. The number of the chip's terminations sums up to 6.
LMK62A2-150M00SIAT Features
Operate frequency at 150MHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Current - Supply：95mA
Additional Feature: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; TR, 7 INCH
LMK62A2-150M00SIAT Applications
There are a lot of Texas Instruments LMK62A2-150M00SIAT Programmable Timers & Oscillators applications.
- Building Automation
- Delay circuits
- High Vibration, High Acceleration Environments
- Safety and Security Platforms
- Clutch Actuator circuit
- Remote Sensors
- Watchdog Timers
- Battery Powered Systems
- Energy Harvesting Systems
- Tamper Detection
