LMK60E2-156M25SIAR Overview
The timer clock is enclosed in a packaging that is attached to the 6-SMD Module. In this case, the frequency of the programmable timer is set to 156.25MHz.It is used to pack in Tape & Reel (TR) case. Type Surface Mount is recommended for mounting.It is possible to supply a voltage of 3.135V~3.465V to the programmable timer.The type of chips can be divided into Clock Oscillator. The operating temperature of this timer clock is -40°C~85°C TA. To keep the clock timer's supply current at 95mA. It is based on LMK60E2. The timer clock contains 6 pins. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; TR, 13 INCH. On operating frequency, it's available in the range of 156.25MHz. The number of the chip's terminations sums up to 6.
LMK60E2-156M25SIAR Features
Operate frequency at 156.25MHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Current - Supply：95mA
Additional Feature: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; TR, 13 INCH
LMK60E2-156M25SIAR Applications
There are a lot of Texas Instruments LMK60E2-156M25SIAR Programmable Timers & Oscillators applications.
- Intruder Detection
- Periodic “Wake-Up” Call
- Remote current sensor
- High Vibration, High Acceleration Environments
- Clutch Actuator circuit
- Long Time One Shot
- Power-On Reset Timer
- Delay circuits
- Remote Sensors
- Tamper Detection
