ALD4501PEL Overview
A 20-DIP (0.300, 7.62mm) box encloses the digital timer. In this case, the programmable timer's frequency is set to 2MHz.It is used to pack in Tube case. There is no recommended mounting type other than Through Hole.2V~12V can be supplied as a voltage by the programmable timer.The type of chips can be divided into 555 Type, Timer/Oscillator (Quad). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Through Hole. To keep the clock timer's supply current at 150μA. The operating supply voltage is rated at 150μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 20 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 12V. The number of Timers/Counters on the device is 4.
ALD4501PEL Features
Operate frequency at 2MHz
Package / Case: Tube
Mounting Type:Through Hole
Current - Supply：150μA
Max Operating temperature at 0°C
4 Timers/Counters
ALD4501PEL Applications
There are a lot of Advanced Linear Devices Inc. ALD4501PEL Programmable Timers & Oscillators applications.
- Long Time One Shot
- Battery-Powered Systems
- Electric Vehicles
- Low-Power Wireless
- Periodic “Wake-Up” Call
- Energy Harvesting Systems
- Watchdog Timers
- Safety and Security Platforms
- Remote Sensors
- Motor control
