LMH6505MM Overview
The linear amplifier is packaged in a MSOP case which makes it easy for the consumer to handle. It comes in a Tape and Reel case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. 8 pins are available on the instrumentation amplifier. Using this buffer op amp requires a temperature of at least -40°C. It is recommended that op amp be used at temperatures below 85°C. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 9V voltage. With regard tp supply voltage, op amp is used under 12V. The linear amplifier's supply voltage should be higher than 7V. There should be a dual supply voltage of 6V for you to conduct this electrical part. The op amp resistance should stay within the range of 7MOhm. The buffer op amp also uses a ANALOG CIRCUIT analog IC.
LMH6505MM Features
8 Pins
supply voltage of 5V
Resistance of 7MOhm
LMH6505MM Applications
There are a lot of Texas Instruments
LMH6505MM Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
