OPA2691I-14DG4 Overview
In order to protect the op amps, a SOIC case is used. There are two types of operational amplifiers in this circuit. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 800μV. In order for this instrumentation amplifier to operate, the supply current needs to be between 10.2mA and 10 . It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Instrumentation amplifier shouldn't be used above 85°C . For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of the buffer op amp is rated at 9V. As a result of this, the buffer amplifier is packed in RAIL. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 5V when using it.
OPA2691I-14DG4 Features
14 Pins
supply voltage of 5V
OPA2691I-14DG4 Applications
There are a lot of Texas Instruments
OPA2691I-14DG4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
