LM3524DN/NOPB Overview
In the 16-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 8V~40V volts and has 8V~40V supply voltage. Suitable for working in an dc switcher that has a 0°C~125°C TJ. As it has a Through Hole value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 20V. In addition to "LM3524", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 60V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. Voltage regulator dc to dc is designed to operate at 49 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. A frequency of 350kHz is set for the switching controller. In dormant mode, 5mA is used. It is possible to set the input voltage as 8V for nominal working statuses. 1mA volts is the supply current. Communication on 2 channels is high-quality. The frequency at which this controller can perform well is 350kHz.
LM3524DN/NOPB Features
Transistor Driver Outputs
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 350kHz
Switching Frequency: 350kHz
LM3524DN/NOPB Applications
There are a lot of Texas Instruments
LM3524DN/NOPB DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
