LM2904PE4 Overview
There is a PDIP case in which the instrumentation amplifier is packaged. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. A Rail/Tube case is used for delivering the op amp. The number of terminations approaches 8. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 7mV. Using a supply current of 1mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 100dB at all times. Using this buffer op amp requires a temperature of at least -40°C. No temperature greater than 125°C should be used. There are 2 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 13V voltage. It is important to keep in mind that the power supply voltage of this electric component is below 26V, which is suitable. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 3V when using it. The dual supply voltage of 13V should be used for the conduct of this electronic component.
LM2904PE4 Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM2904PE4 Applications
There are a lot of Texas Instruments LM2904PE4 Instrumentational OP Amps applications.
- ECG equipment
- Automotive sensors
- Video conversion and routing
- Division circuits
- Polarized electrodes
- Tablets
- Logarithmic operation circuits
- Multiplication circuits
- Oscilloscopes
- Signal amplification
