MC3403DRE4 Overview
It is packaged in an D-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape and Reel case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 10mV for input offset voltage. A supply current of 2.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 106.02dB. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. There are 4 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. It is important to keep in mind that the power supply voltage of this electric component is below 30V, which is suitable. Keeping the linear amplifier's supply voltage above 5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 15V volts.
MC3403DRE4 Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
MC3403DRE4 Applications
There are a lot of Texas Instruments
MC3403DRE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
