LM25119PSQX/NOPB Overview
With a 32-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 2 numbers. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~42V and has a 4.5V~42V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Switching can be done at 50kHz~750kHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Enable, Frequency Control, Ramp, Reset, Soft Start for efficient switching control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at QUAD. There are many different types of terminations for 32. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 12V volts. You can find other relevant dc to dc converter ics by searching "LM25119". 32 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. DC regulator outputs 15V voltage according to the test statistics. If you start a project, note down the dc dc regulator's usual output current of 20A. Voltage regulator dc to dc is designed to operate at 95 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. The max frequency of the pmic can reach 530kHz. For better satisfaction, the value of DC to DC voltage regulator is PROGRAMMABLE OUTPUT FROM 0.8 V. DC switching uses 6mA when it is dormant. This voltage controller requires a supply voltage of 36V. There should be 7.3mA current exceeding 7.3mA supplied to the controller.
LM25119PSQX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~750kHz
Enable, Frequency Control, Ramp, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
PROGRAMMABLE OUTPUT FROM 0.8 V
LM25119PSQX/NOPB Applications
There are a lot of Texas Instruments LM25119PSQX/NOPB DC to DC converter applications.
- Precision electronic equipment
- Flaw detection equipment
- Geothermal power
- Electrical distribution systems
- Television equipment
- Computer monitoring equipment of building
- Sink circuits
- Product testing
- Die casting equipment
- Drilling machines
