LTC1702IGN#PBF Overview
As a result of 24-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 3V~7V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 550kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Power Good, Soft Start. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 24. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. A search for "LTC1702" will reveal other relevant dc to dc converter ics. 24 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator must be 3V. Statistically, the DC regulator outputs 3.3V voltage. Voltages 7V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 90 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 750kHz. Input current cannot exceed 25A with this dc switcher.
LTC1702IGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 550kHz
Current Limit, Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
LTC1702IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC1702IGN#PBF DC to DC converter applications.
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
- Injection molding machinery
