ISO122U/1KE4 Overview
In the package, you will find a SOIC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the ISOLATION AMPLIFIER-type. A Tape and Reel case is used for delivering the op amp. During the past two weeks, there have been close to 28 terminations. A total of 28 pins are located on this board. This linear amplifier should be powered by an 15V battery. This particular linear amplifier is a type of Isolation Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 50mV as input offset voltage. You should keep the voltage gain at 0dB for the time being. To operate this buffer amplifier, the temperature must not be lower than -25°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 36V. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part. During testing, the instrumentation amplifier resistance should remain within a range of 200kOhm.
ISO122U/1KE4 Features
28 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 200kOhm
ISO122U/1KE4 Applications
There are a lot of Texas Instruments
ISO122U/1KE4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
