DRV401AIDWPRG4 Overview
Sensor and detector interface is packaged wSensor and detector interfaceh materials from Tape & Reel (TR).20-SOIC (0.295, 7.50mm Width) Exposed Pad pacakge is used for space saving.Despite being a type of Sensor Conditioner, it is capable of delivering superior performance.As its mounting technique, the Surface Mount technique is used.To avoid unnecessary cooling, the operating temperature should be kept at -40°C~125°C.The input type is Logic.The use of 20 terminations is intended to prevent signals from reflecting off the transmission line's end.According to its base part number of DRV401, related electronic parts are available.This device is configured with 1 functions.The voltage supply is 5V.Basically, it is an electronic device with 20-pins.The pins of a 20 component have been designed to perform specific functions.By maintaining the operating supply current at 6.8mA, more efficiency can be achieved.There will be failures when the supply voltage exceeds 5.5V.A failure will occur if the supply voltage is below 4.5V.Data transmission is provided by 5 channels.
DRV401AIDWPRG4 Features
With 5V channels
operate temperature at the range of 6.8mA
DRV401AIDWPRG4 Applications
There are a lot of Texas Instruments DRV401AIDWPRG4 applications of sensor and detector interfaces.
- Motion Triggered Events (Animal photography)
- Level transmitter
- Humidity Sensors
- Security system intrusion detection
- Automatic doors
- sensing
- Door Power Locks
- Pressure Calibrators and Controllers
- Position sensor
- Simple bus-controlled part for remote control and
