TPL9202PWPG4 Overview
Sensor and detector interface is packaged with the materials of Tube.20-PowerTSSOP (0.173, 4.40mm Width) pacakge is used for space saving.Having the ability to provide superior performance because it is a type of Relay/Load Driver.As a mounting method, Surface Mount is employed.If possible, the operating temperature should be kept at -40°C~125°C in order to avoid unnecessary cooling.The input type adopted by the program is Logic.A 20 termination prevents signals from reflecting off of the end of a transmission line.By using its base part number of TPL9202, it can be found to be related to other electronic parts.In this case, it is configured with a 1 function.Basically, it is an electronic device with 20-pins.Each 20 component pin is designed for a specific purpose.Sensor and detector interface is mounted in the direction of Surface Mount.By maintaining the operating supply current at 5mA, more efficiency can be achieved.Failures will occur when the supply voltage exceeds 18V.In the case of a lower supply voltage than 7V, failures will occur.A unique technique was used in the design of this electronic device classified under the subcategory of Power Management Circuits.Data transmission is carried out using 8 channels.By using this device, 150mA can be controlled in terms of its output current.
TPL9202PWPG4 Features
operate temperature at the range of 5mA
TPL9202PWPG4 Applications
There are a lot of Texas Instruments TPL9202PWPG4 applications of sensor and detector interfaces.
- Unmanned Systems
- Zero Crossing Switch
- Speed Sensing
- Transducers and Transmitters
- Simple bus-controlled part for remote control and
- Automatic Lighting (Residential and Commercial)
- and safety systems
- Accelerometers
- Crankshaft VRS Interfaces
- System power consumption
