CY74FCT821CTSOC Overview
24-SOIC (0.295, 7.50mm Width)is the way it is packaged. You can find it in the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. JK flip flop belongs to the 74FCTseries of FPGAs. The list contains 1 elements. T flip flop consumes 200μA quiescent energy. 24terminations have occurred. It is a member of the 74FCT821 family. It is powered from a supply voltage of 5V. Input capacitance of this device is 5pF farads. It belongs to the family of electronic devices known as FCT. Surface Mount mounts this electronic component. The 24pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 10bits in its design. There are 5V power supplies attached to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. For high efficiency, the supply voltage should be set to 5V. As a result of its output current of 64mA, it is very flexible in terms of design. The number of input lines is 10.
CY74FCT821CTSOC Features
Tube package
74FCT series
24 pins
10 Bits
5V power supplies
CY74FCT821CTSOC Applications
There are a lot of Texas Instruments CY74FCT821CTSOC Flip Flops applications.
- Single Up Count-Control Line
- Data transfer
- Communications
- Digital electronics systems
- Computers
- Patented noise
- Count Modes
- Power down protection
- Bus hold
- Data storage
