SN74ALS564BNSR Overview
In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. The Tape & Reel (TR)package contains it. This output is configured with Tri-State, Inverted. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 4.5V~5.5V volts, it operates. It is at 0°C~70°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. The FPGA belongs to the 74ALS series. You should not exceed 30MHzin the output frequency of the device. The element count is 1 . This process consumes 18mA quiescents. There have been 20 terminations. If you search by 74ALS564, you will find similar parts. The power supply voltage is 5V. An electronic device belonging to the family ALScan be found here. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. An electronic part designed with 8bits is used in this application. Its flexibility is enhanced by 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. A total of 5V power supplies are needed to run it. This D flip flop is equipped with 0 ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 24mA. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74ALS564BNSR Features
Tape & Reel (TR) package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS564BNSR Applications
There are a lot of Texas Instruments SN74ALS564BNSR Flip Flops applications.
- Synchronous counter
- Bus hold
- Differential Individual
- QML qualified product
- Frequency Divider circuits
- Asynchronous counter
- Circuit Design
- Load Control
- Buffered Clock
- Instrumentation
