CY74FCT377CTSOCTE4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Non-Inverted. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74FCTseries FPGA. A total of 1elements are present in it. As a result, it consumes 200μA quiescent current. It has been determined that there have been 20 terminations. You can search similar parts based on 74FCT377. Power is provided by a 5V supply. This JK flip flop has a 5pFfarad input capacitance. In this case, the D flip flop belongs to the FCTfamily. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has Positive Edgeas its clock edge trigger type. It is included in FF/Latches. It is designed with a number of bits of 8. As soon as Vsup reaches 5.25V, the maximum supply voltage is reached. It is imperative that the supply voltage (Vsup) is maintained above 4.75Vin order to ensure normal operation. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch operates on 5V volts. It is reported that there are 8 input lines.
CY74FCT377CTSOCTE4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT377CTSOCTE4 Applications
There are a lot of Texas Instruments CY74FCT377CTSOCTE4 Flip Flops applications.
- Latch-up performance
- Balanced Propagation Delays
- Balanced 24 mA output drivers
- 2 – Bit synchronous counter
- Bus hold
- Pattern generators
- Differential Individual
- Event Detectors
- Common Clocks
- ESD protection
