CLVTH16374IDGGREP Overview
48-TFSOP (0.240, 6.10mm Width)is the way it is packaged. You can find it in the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2.7V~3.6V volts. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74LVTH series. Its output frequency should not exceed 160MHz. In total, it contains 2 elements. As a result, it consumes 190μA quiescent current. There are 48 terminations,It is a member of the 74LVTH16374 family. Power is supplied from a voltage of 3.3V volts. A 3pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of LVT. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. It is designed with 16bits. 3.6Vis the maximum supply voltage (Vsup). Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A D flip flop with 2embedded ports is available. A high level of efficiency can be achieved by maintaining the supply voltage at 3.3V. With an output current of 64mA, it is possible to design the device in any way you want. The JK flip flop is with 8 output lines to operate. 5mAquiescent current consumed.
CLVTH16374IDGGREP Features
Tape & Reel (TR) package
74LVTH series
48 pins
16 Bits
CLVTH16374IDGGREP Applications
There are a lot of Texas Instruments CLVTH16374IDGGREP Flip Flops applications.
- Balanced 24 mA output drivers
- Reduced system switching noise
- Asynchronous counter
- Automotive
- Instrumentation
- Data Synchronizers
- ATE
- Shift registers
- Buffered Clock
- Frequency Divider circuits
