CD40175BM Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). It is included in the package Tube. Currently, the output is configured to use Differential. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 3V~18Vis used as the supply voltage. Temperature is set to -55°C~125°C TA. This logic flip flop is classified as type D-Type. It belongs to the 4000Bseries of FPGAs. Its output frequency should not exceed 14MHz Hz. In total, it contains 1 elements. There is 4μA quiescent consumption. There have been 16 terminations. The object belongs to the CD40175 family. Power is provided by a 5V supply. There is 5pF input capacitance for this T flip flop. It is mounted by the way of Surface Mount. There are 16pins on it. There is a clock edge trigger type of Positive Edgeon this device. This device has the base part number FF/Latches. This flip flop is designed with 4 Bits. The supply voltage (Vsup) should be kept above 3V for normal operation. The 6.8mA output current allows it to be designed with the greatest amount of flexibility. A total of 4input lines have been provided. This D latch consumes 20μA quiescent current at all.
CD40175BM Features
Tube package
4000B series
16 pins
4 Bits
CD40175BM Applications
There are a lot of Texas Instruments CD40175BM Flip Flops applications.
- Event Detectors
- Convert a momentary switch to a toggle switch
- Buffer registers
- Automotive
- Storage Registers
- Bus hold
- Parallel data storage
- Storage registers
- Cold spare funcion
- Single Down Count-Control Line
